IKEA VIDGA Set of 3 Anchored Custom Track Connectors

Description

IKEA VIDGA Set of Anchored Custom Track Connectors.
Package contains 3 Connectors.
1 Straight-to-Straight Anchored Connector
2 Straight-to-Curved Anchored Connector
Sick of having your curtains snag on the transitions between tracks because they aren't straight or level.
Don't have enough ceiling mounts once you added in a curve to your track?
Custom made in the USA, these joiners are rigid and well fitted to the track and will keep your track aligned.
They are custom fit to the straight and curved rails and clearly indicated on the part with the arrow.
They can act as extra mounting points around curves (you do not have to screw them in).
Use only a single mounting hole, two holes are given for convenience to pick the easiest to use.
When used as mounting points, you will need to mount them one at a time going in a single direction or
you will be unable to install the tracks.  They do reduce the ease of track removal so do not use them in areas
where you plan to adjust the curtains regularly.
The small gap between tracks is normal and does not affect
curtain movement.  Your curtains will run more smoothly with these installed.
Track and mounting hardware is NOT included
- holes will easily accommodate both kinds of small screws in
the IKEA wall mounting set.  Any screw with a head less than 3mm tall and 8mm in diameter should work.
Specs - 61.5mm x 15.25mm x 13mm at their largest measurements.
For large quantities please contact me for volume discounts on both per-item cost and shipping.
(I also have listings for sets and larger quantities)